On Sun, 12 Aug 2001 15:00:03 +0200, "Mike" wrote:

>Your VX2000 has a stereo (3-point) input jack for audio - get a mono to
>stereo converter at Radio Shack or someplace similar.
>
>You can make the cable yourself, just send the line signal to both the tip
>and middle part of the miniplug. The part near the base is ground.
>
>If you are unsure, go to a professional shop and get the right cable or
>adapter.

This is good advice - though I've found the RS
mono-to-stereo plug adapter unfortunately quite
inreliable, alas... For the original poster:
"Y" the sound to two mono cable connectors,
then use a RS dual-mono-to-stereo mini-plug
adapter (with the right input connectors...).
Though this involves more contacts, I have
found the connections with this solution more
reliable than trying to use the small one-piece
RS adapter. Best, though, is to make your own
adapter cable as described above. Be sure to
switch the VX-2000 input to "line" when taking
in the mixer output...