On Wed, 26 Feb 2003 10:36:27 -0500, "Jack Hayes" <atrei@cyberbeach.net> wrote:

>The mic input connector can supply power for mics that require this (about 2

>to 3 volts) but what do you do when using a wireless mic system that does

>not require power from this input? As my wireless mic is mono only, I need

>to connect the two channels together so the mono will record on both

>channels. What precautions if any are required to do this?

Most of these work fine plugged straight into the

Sony mic input, blocking the DV and giving you

the same mono signal on both channels...